Having a dead car battery can be a major inconvenience, especially when a jumpstart just won’t do the trick. Fortunately, changing the battery in your vehicle can be a quick fix if you possess the know-how to replace it. Here’s how to replace your car battery by yourself quickly and safely.
Step 1: Ensure your car is safely parked.
Park your car on a level surface, and be sure to turn off the engine and set the parking brake.
Step 2: Open the hood of your car.
From there, you should be able to locate the battery and identify the positive (red) and negative (black) terminals.
Step 3: Loosen the negative and positive terminal clamps with a wrench.
Once they are loose, remove the clamps from the battery.
Step 4: Lift the battery out of the car.
Be careful not to drop the battery, as it can be heavy.
Step 5: Install the new battery in the same location as the old battery.
Check the battery connections to make sure they are secure. Make sure the positive and negative terminals are connected to the correct posts, then use a wrench to tighten the positive and negative terminal clamps.
Step 6: Close the hood of your car.
Step 7: Start your car and let it run for a few minutes.
This will allow the battery to charge.
Above all else, it’s essential to be safe when you replace your car battery. Here are some additional safety tips to keep in mind:
- Wear safety glasses and gloves. This can help prevent you from burns and other injuries.
- Do not smoke or allow open flames near the batteries.
- Do not touch the metal parts of the battery together.
- Be careful not to cross the positive and negative terminals.
- If the battery is leaking, do not change it. Call an expert to assist you.
If you need of a new battery, SJ Mobile Auto Battery Co can deliver and replace your vehicle’s battery anywhere in the Denver Metro Area 720-998-3891